25 amp Brushless ESC for Mini T, RC18T, mini Inferno and many other 1/18 scale applications. Will work with all micro sensorless brushless motors.

A great upgrade for the RC18T, the stock shocks are plastic bodied and not threaded. These billet aluminum shocks have fully threaded bodies to allow better preload adjustments.

We have tested many motors on the mini T and RC18T. And this one is among the fastest. It will considerably increase acceleration and top speed on either car. On both cars, the stock ESC (electronic speed controller) will handle it , only will run hotter. Check our site for more tame 30 turn motor, still quite a bit faster than stock and a little safer on your stock electronics.

The single best modification you can perform on the RC18T. The stock plastic outdrives often flex and allow dogbone axles to pop out, a common flaw on the stock RC18T. This is a good upgrade when running modified motors, especially in the rear. Ideal for racing.

We have tested many motors on the mini T and RC18T. And this one, is one of our best picks. It will considerably increase acceleration and top speed on either car. On both cars, the stock ESC's(electronic speed controller) will handle it , only will run just a little warmer. Check our site for the more powerful 27 turn motor.

A great upgrade, more precise steering control and alot of the steering (play) looseness is eliminated. A must, especially for racing.

These are equipped with ballends and ball studs, ready to install. A great upgrade for racing as stock steel tie rods can only handle so much.

A great upgrade for racing, as often the stock steel hinge pins bend in crashes and racing conditions. As with many titanium hop ups, there is also a weight benefit.